• This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #3494 Reply

    whitertth
    Spectator

    Here is a simple case of a margin repair, but i want everyone to take note of a few things
    1- New bonding agent made by JMorita…called one up bond plus…ez to use…true one step with great bond strengths.  place a and b in dappen dish it appear yellow…when mixed it becomes pink and u apply to tooth…when you cure it, it becomes clear again…cool stuff
    2- Photos improve dentistry as after I took the pics i went back and polished number 8 better because it didnt look good..of course I forgot to take a final pic but u get the idea….
    Waterlase g-4 tip 1.5 watts 20 air 12 water…obviously no local and it was restored with Gradia….
    pictures as follows…preop,prep,bonding agent before and after mixing, on prep, and finally before final polish…And as i said i forgot final…will get it next week…

    EPSN0020.jpg
    EPSN0023.jpg
    EPSN0024.jpg
    EPSN0025.jpg
    EPSN0027.jpg
    EPSN0032.jpg

    (Edited by whitertth at 11:36 pm on Dec. 6, 2004)

    #11798 Reply

    dkimmel
    Spectator

    Ron, Looks great. Couple questions about ONE UP?
    Since you are bonding not only to tooth but porc, is there a need to use a porc etch and a Silane componet prior to using ONE UP?

    #11799 Reply

    whitertth
    Spectator

    These are actually composite laminates done a while ago but if it was porcelain I would have etched and silanated….

    #11802 Reply

    arrowsmith
    Spectator

    Ron,

    Could you have coronally repositioned the gingiva, thus eliminating the need for a restoration and maintaining proper height/width ratios and maintaining gingival symmetry? Just thinking like a periodontist . . .

    aaroN

    #11800 Reply

    whitertth
    Spectator

    maybe but this is so benign that I really dont worry about it…..good question,,,,

    #11803 Reply

    billstrupp
    Spectator

    Was this a shoulder prep on the original laminate?

    #11801 Reply

    whitertth
    Spectator

    dont know I DIDNT DO THEM….

Viewing 7 posts - 1 through 7 (of 7 total)
Reply To: laminate repair
Your information: