Forums Nd:YAG lasers General Nd:YAG Forum Nd:YAG and Endo2

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2719 Reply

    etienne
    Spectator

    Hi
    This patient presented with a massive periapical lesion and lots of pain.

    [img]https://www.laserdentistryforum.com/attachments/upload/pre-resize1.JPG[/img]

    I completed the endo with the help of the Nd:YAG laser in one appointment as there was no drainage and the canals were dried completely with the laser.

    [img]https://www.laserdentistryforum.com/attachments/upload/post-resize.JPG[/img]

    The patient did not want as a crown as I wasn’t sure how the lesion would resolve. I sealed the access cavity with a temp. The patient only came back now, six months later with a crack mesiodistal up to the level of the bone loss. If I had placed a crown at the time the tooth would probably still be functional, now it is in the bin…

    [img]https://www.laserdentistryforum.com/attachments/upload/now-resize.JPG[/img]

    I found the amount of bone regeneration very interesting. The crack must have been there for a while to cause that much bone loss. With hindsight, a temporary crown would have been the answer?
    Take care
    Etienne

    (Edited by etienne at 1:54 pm on Feb. 4, 2006)

    #5503 Reply

    Robert Gregg DDS
    Spectator

    With hindsight, a temporary crown would have been the answer?

    After having a few split molars like that of my own, I now always make a temp crown on molar endo.

    Bob

    #5502 Reply

    Chip Payet
    Spectator

    Hi Robert, my first post on this forum……

    I’m seriously contemplating getting a Periolase, although at the moment it’s all going to come down to the money. If not now, then i’m sure next year. Be that as it may…..

    I really love doing endo, and I’ve heard that the laser can indeed be used as a step in endo treatment, but don’t know much about it. I don’t know of any endodontists offhand who do so, but it seems to make sense.

    Can you elaborate a bit more on this use? I’m sorry, but as a newbie here, I don’t know how to do a comprehensive search yet if the topic has already been addressed.

    #5501 Reply

    Anonymous
    Guest

    Hi Chip, welcome to LDF!

    Here’s a couple posts to get you started-

    <a href="http://www.rwebstudio.com/cgi-bin/ikonboard//topic.cgi?forum=25&topic=145

    http://www.rwebstudio.com/cgi-bin/ikonboard//topic.cgi?forum=29&topic=181

    ” target=”_blank”>http://www.rwebstudio.com/cgi-bin….

    http
    I’m sure Bob will chime in also.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Nd:YAG and Endo2
Your information: